Kept guides · Using Kept
Racks and spots
A rack is anywhere bottles live. Set your racks up once, and every bottle has a spot you can find again.
The four kinds of rack
Every rack is one of four kinds, and its kind names its spots.
| Kind | What it is | A spot is called |
|---|---|---|
| Rack with a slot per bottle | A slot for each bottle. | C4: the column's letter, then the row's number, counted from the top left. |
| Open shelves | Each shelf holds several bottles. | Shelf 7 |
| Wine fridge | Shelves behind a glass door, with space at the bottom for big bottles. | Shelf 7, or Bottom for the space under the shelves. |
| Diamond bins | Each cube is crossed into four bins. | A top, A right, A bottom, A left |
Set racks up from a film
- On the Racks tab, select Film the cellar.
- Film each rack from far enough back to see all of it, for a few seconds each. A minute or two in all is plenty.
- Say what you see as you go, and point the camera at each fridge's temperature display: “This is the first fridge: twenty shelves of eight, with room for six at the bottom, set to fifty-five.”
- On Set up the cellar, check each rack Kept proposes, and create the ones you want.
Say the numbers: what you say counts for more than what Kept counts from the picture. Kept creates nothing until you tell it to.
Add a rack by hand
On the Racks tab, select Add a rack by hand. The form asks for what the rack's kind is made of.
- Give the rack the name you call it by.
- Choose its Type. A rack with a slot per bottle asks for rows and columns, open shelves and a fridge for Shelves and Bottles per shelf, and diamond bins for Cubes and Bottles per bin.
- Fill in its size. Columns per section is for a long rack built in sections: Kept draws a gap between them and fills one before the next.
- Extra space is room without spots, such as the bottom of a fridge. Temperature is what a fridge's display reads. Leave either blank if the rack has none.
- Select Add rack.
Set the cellar's temperature
Every rack has a temperature: a fridge its own, and any other rack the cellar's, which you set on the Racks tab under Cellar temperature.
Warmth is what harms wine. Above about 57°F, a wine ages faster than it should, which matters more the longer you mean to keep it and the more it cost.
Where Kept suggests a bottle should go
When you leave the spot to Kept, it weighs these:
- How warm each spot is. The bottles you will keep longest, and those that cost most, get the cool spots first. A bottle you will drink soon goes on a rack.
- What suits the drink. Each kind of wine is content in a range of temperatures, and one that is not ready wants about 55°F. Beer goes in the cold.
- Where the rest of it is. More of a wine you own goes beside the bottles you have.
- Spirits go on a rack, where warmth does them no harm, and take no fridge spot from a wine.
These are rules of thumb. To overrule one, choose another spot.
Choose a spot yourself
You never type a spot. On any form that names one, select Choose another spot and tap the slot, the shelf or the bin you mean in the drawing. The buttons above it switch to another rack.
Put bottles away
Some bottles have no spot yet: a spreadsheet's bottles that named no rack, and any bottle added or put back with no rack chosen. They wait in a crate, Waiting for a spot, first among your racks. Tap it and select Put them away, and Kept takes you through them one at a time.
- Kept shows the bottle, the spot that suits it and why. Carry the bottle there.
- If it went somewhere else, open Choose another spot and tap that spot in the drawing.
- Select Put it there. Kept records the spot and shows the next bottle.
- Leave it for later skips a bottle, and Kept offers it again at the end.
The bottles come in the order that saves steps: one rack at a time, from its first row, and never two to one spot. When no spot that suits a bottle has room, Kept says so: tap any spot with room, or leave it for later. You can stop at any point, and the rest wait for you.
Where a bottle sits on a shelf
A shelf, a bin and the space under a fridge's shelves each hold several bottles, and each bottle keeps its own spot there. When you take one out, the others stay where they are and Kept draws the gap. The next bottle put there takes the first gap.
The order a rack fills in
Several bottles going into one rack fill along a row, then the next row down. A shelf, a bin or a diamond cube fills before the next one starts, and a rack in sections fills one section before the next.
To fill a rack a column at a time, open it, select Change this rack, and set Bottles go in to Down each column, then the next column. Kept then fills it that way, both when it chooses spots and when you add several bottles from one spot onward. The spots keep their names.
Find a bottle
Open the wine from the Cellar tab. Its page lists where each bottle is. Tap a spot, and Kept draws that rack with the wine's bottles lit.
See the whole cellar at once
The Cellar tab can show your wines in their racks, side by side in the order they stand.
- On the Cellar tab, select Where above the list.
- Search, or tap a type in the key, a chip or a filter. Kept lights the bottles that match where they lie, with a count under each rack, such as 18 here.
- Tap a rack to open it. The same bottles stay lit there.
Anything that narrows the list narrows the racks, and Show everything clears it. The On a map card opens the racks with one place's bottles lit: see Read about a place.
Free spots lights every empty spot, with a count for each rack. The crate, Waiting for a spot, counts the bottles with no spot yet: see Put bottles away.
See what is in a rack
Open a rack from the Racks tab and tap a bottle. Kept brings it out the way it comes out in your cellar, with a card about it.
- In a fridge, the whole shelf slides out and its bottles stand up. Swipe for the rest of a long shelf, and use the arrows beside the shelf's name for the shelf above or below. Tap a + to add a bottle to an empty spot.
- In a wooden rack or on open shelves, the bottle comes out on its own.
Tap the card to open the bottle's page. Opened it under the card, or Finished it for a spirit or a mixer, records the bottle, and the Cellar tab then asks how it was and can put it back. Ask about it talks the wine over: see Ask about one wine. To put a bottle or a shelf back, tap ×.
How each bottle is drawn
A bottle added from a photo or a film wears its own label, set straight, shortly after it goes in. One typed in, or whose picture does not show the label clearly, has the maker's initials and the year.
A drink Kept knows wears a photo of itself as it is sold, checked against your own photo, and a wine with a year takes only a photo of that year. On the wine's page, select Your photo to see yours, or Not this bottle if it shows another drink, and Kept does not look for that wine again. Photo credits, at the foot of Settings, lists each photo's source.
Tap a diamond bin to add a bottle to its pile, and read what it holds in the list under the drawing.
Check a rack against a film
Records drift: a bottle opened and not recorded, one moved in a hurry. Open the rack, select Check this rack with a film, and film along it slowly, a shelf at a time, close enough for each label to be read. Kept lists each wine where the film and the record differ:
- Recorded here and not seen: It was opened records it as drunk today, and It is somewhere else sends it to the put-away walk.
- Seen here and recorded somewhere else: It was moved here, or one button for several, such as Move all 3 here.
- Seen here and not in the cellar: Add it here.
- The record is right passes over a difference the film got wrong.
Nothing changes until you say. As you film, turn any bottle whose label faces the wall.
Move bottles
To move many bottles at once, select Move bottles on a rack's page or on the Racks tab.
- Tap a bottle, then the spot it goes to, or press and hold it and drag it there. A full slot swaps the two.
- The bottles you are moving stay with you as you change rack along the top. Place all in this rack fills the rack on screen, and Return them puts them back.
- Moving a bottle to Waiting for a spot takes it out of its rack for the put-away walk.
Nothing changes until you select Done. Straight after, Put them back as they were on the rack's page takes every move back.
On a rack's own page, drag a bottle to its new spot, or to Another rack. To move one bottle from its wine's page, choose the bottle, then the spot.
Moves worth making, on the Racks tab, has Kept look at the whole cellar. It recommends a move only when the bottle gains enough to be worth the trip, and shows each rack's moves with the bottles that leave it lit. Mark each move done as you carry it.
Racks kept somewhere else
A rack can be kept away from home: in a storage locker, at a second home, or at a shop that holds your bottles. On the rack's form, fill in Where is it?, or leave it blank for home.
- Bottles kept away count in the cellar and its reports, each with its place, but tonight, plans and games offer only bottles at home.
- A wine kept away at the end of its best years is still in your Daily Kept Summary, which is the time to bring it home.
Select Bring bottles home under the place's name and check the bottles, the readiest first. Print the sheet prints the checked ones with their rack and spot. When they are home, select These are home, and the put-away walk gives each a spot.
Leave a tablet by the racks
A tablet on the cellar wall can stay open on Kept for anyone who wants to find a bottle, with a PIN so that a stray tap changes nothing. The PIN belongs to the cellar, and each device is set up for itself. To put the tablet there, see Put a tablet by the cellar door.
- On the device, select the gear for Settings, and find PIN lock.
- Type a PIN of 4 to 8 digits, type it again, and select Set the PIN.
- Under This device, choose how it locks and how long it may be left alone. To keep the tablet's own lock from coming on first, choose Keep the screen on. Select Save for this device.
- Look only. Anyone can look at the cellar, a wine, the racks and the reports. The PIN is asked for before anything changes, before Kept is asked a question, and before the settings open.
- Fully locked. Nothing of the cellar is shown until the PIN is given.
The open padlock beside the gear locks a device at once. With Keep the screen on, plug the tablet in, and if its screen still goes dark, set its own Auto-Lock, or screen timeout on Android, to Never.
The PIN only opens a device already signed in to the cellar, and is never a way of signing in. After three wrong tries a device waits, and after ten it signs itself out. If you forget the PIN, select Forgot the PIN? on the lock screen and give the cellar's password, and the lock comes off that device. To change the PIN, or take it off every device, use Change or take away the PIN.
On a wall tablet, also use the tablet's own single-app or guided-access mode: a PIN cannot stop someone leaving Kept for another page of the browser.